What Is Exit Load in Mutual Funds? SEBI's New 3% Cap
What is exit load in mutual funds? Learn how the early-exit fee works, what SEBI's new 3% cap means, and how to check it, with a simple ₹ example.

What is exit load in mutual funds? It is a small fee a fund charges when you take your money out too early, usually within a year of investing. It is deducted from the amount you receive, and if you stay invested past the exit load period, you pay nothing.
SEBI has now lowered the highest exit load a scheme can charge from 5% to 3%. Most funds charge far less, so for most investors the real lesson is simple: check the exit load period before you invest, so a sudden need for cash does not cost you extra.
This guide explains how the fee works, what SEBI changed, how much you could pay in rupees, and how it differs from the expense ratio.
What is exit load in mutual funds?
Exit load is a charge taken when you redeem (withdraw) units of a mutual fund within a set period after investing. The period and the percentage are different for each scheme and are written in its scheme information document and on the fund house's website.
A common example is "1% if redeemed within 1 year, nil after that". The idea is to discourage people from moving in and out of a fund quickly. Frequent exits force the fund manager to keep cash ready or to exit holdings at a bad time, which affects the investors who stay.
Exit load is not charged when you invest. It only appears when you withdraw. Mutual funds in India have had no entry load since SEBI abolished it with effect from 1 August 2009.
How does exit load work?
The fund works out the redemption value of your units at the day's NAV. If the exit load applies, it takes its percentage out of that amount and pays you the rest. You do not get a separate bill.
Two points are worth knowing:
- The load is credited back to the scheme, not kept by the fund house as income. It benefits the investors who remain in the fund.
- Most funds count your oldest units first. So if you invested at different times, only the units still inside the exit load period carry the fee.
Funds with an exit load period of 7 days, 30 days, 90 days or 1 year are all common. Always read the exact terms for your scheme.
What did SEBI change about the exit load cap?
SEBI's Annual Report 2025-26 says the highest exit load that can be charged on mutual fund schemes has been reduced from 5% to 3%, and that the load continues to be credited back to the scheme for the benefit of the remaining unitholders. The report adds that exit loads are generally 1% to 2% in practice, so the new cap matches what most funds already do.
The change sits inside the new SEBI (Mutual Funds) Regulations, 2026, which SEBI notified on 14 January 2026 and which replaced the 1996 rules. Business Today's report of 7 August 2026 also covers the cut.
Two things the sources do not tell us: the report does not state the date from which each fund must follow the lower cap, and it does not say how an existing scheme's document changes. So do not assume your fund's exit load has already fallen. Look at its latest document.
How much exit load will I pay? A rupee example
Rohan invests ₹2,00,000 as a lump sum in a fund with an exit load of 1% if redeemed within 1 year. After 8 months, he needs cash. Suppose his units are then worth ₹2,10,000. These are made-up numbers to show the arithmetic.
- Exit load: 1% of ₹2,10,000 = ₹2,100.
- Amount he receives: ₹2,10,000 minus ₹2,100 = ₹2,07,900.
Had he waited until month 13, the same redemption would carry no exit load. And under the highest cap of 3%, the most a scheme could take from ₹2,10,000 is ₹6,300. Past returns are history, not a promise, so treat the ₹2,10,000 only as a sample.
Try your own amounts in the fund returns calculator.
How does exit load work in a SIP?
In a SIP, every monthly instalment is a separate purchase of units with its own date. So the exit load clock starts again for each instalment.
Say you invest ₹5,000 a month for 14 months, and the fund charges 1% within 1 year. If you redeem everything on the last day, the first two instalments are more than a year old and carry no load. The other 12 instalments are still inside the period. If those 12 are worth ₹66,000 on that day, the load is 1% of ₹66,000, which is ₹660. Again, these numbers are only for illustration.
This is why people who start a SIP and stop it after a few months can pay an exit load they did not expect. The SIP calculator shows how a monthly amount grows over time, and our explainer on SIP in mutual funds covers the basics.
Exit load vs expense ratio vs lock-in
These three get mixed up all the time. They are different things:
| Item | When it applies | Who gets it |
|---|---|---|
| Exit load | Only if you redeem within the set period | The scheme, for remaining investors |
| Expense ratio | Every day, as a share of the fund's assets | The fund house and its service providers |
| Lock-in | You cannot redeem at all during the period | Not a fee, it is a restriction |
An ELSS fund, for example, has a 3-year lock-in, which means you cannot redeem before it ends. See the ELSS fund category to compare such funds. For the yearly fee, read what the expense ratio in mutual funds is.
How do I check and avoid exit load?
You can check a fund's exit load in three places: the scheme information document, the fund house's website and the factsheet. Look for the line that gives the percentage and the number of days or years.
To keep it from costing you:
- Invest money you will not need for at least the exit load period.
- Keep an emergency fund separate, so you do not have to redeem your long-term funds.
- Compare funds of the same category, including their load, in the mutual fund screener.
- If you need money for a short time only, look at funds designed for short periods, such as liquid funds, and read their own terms first.
- Before you redeem, check how many of your units are past the exit load period.
Key takeaways
- Exit load is a fee on early redemption, not a fee on investing.
- SEBI's highest allowed exit load is now 3%, down from 5%, and it is credited back to the scheme. Most funds charge 1% to 2% or less.
- Each SIP instalment has its own clock.
- Exit load, expense ratio and lock-in are three different things.
- Read your scheme's document for the real percentage and period.
Next, use the fund returns calculator to see what a real fund's SIP or lump sum became, and then check its exit load before you invest.
Frequently asked questions
What is a good exit load for a mutual fund?
There is no single good number, because it depends on the fund. SEBI's annual report says exit loads are generally 1% to 2% in practice, and many funds charge nothing after a year. Compare funds of the same category and check how long the load lasts.
Is exit load charged on every mutual fund?
No. It depends on the scheme. Some funds have no exit load and others have one for a few days, months or a year. The scheme information document states it.
Is exit load the same as expense ratio?
No. The expense ratio is a yearly running cost taken from the fund's assets every day. Exit load is a one-time charge, only if you redeem within the set period.
What is the new maximum exit load in India?
SEBI's Annual Report 2025-26 says the highest exit load on mutual fund schemes has been cut from 5% to 3%. The report does not give the date from which each fund must follow it, so check your scheme's latest document.
Sources
- SEBI Annual Report 2025-26, Chapter 5: Fund Management Activities
- SEBI (Mutual Funds) Regulations, 2026 (last amended on 10 October 2026)
- Business Today: Exiting mutual funds may get cheaper as SEBI cuts maximum exit load cap to 3% (7 August 2026)
- Business Standard: Sebi stops entry load for MFs (2009)
This article is for learning only and is not investment advice. RupeeVerse is not a SEBI-registered investment adviser or research analyst. Please do your own research, or speak to a SEBI-registered adviser, before you invest.


